| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Suspension | Section: Suspension Control System | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000001NLO002X |
| Title: SUSPENSION CONTROL: HEIGHT CONTROL SENSOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Install the rear height control sensor with the nut.
Torque: 13 N·m (127 kgf·cm, 9 ft·lbf)
(b) Connect the rear height control sensor connector.
|
(c) Align the matchmark on the rear height control sensor link and bracket. |
(d) Install the rear height control sensor link with the nut.
Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)
2. ADJUST VEHICLE HEIGHT
|
|